Accuracy · Measured results

How accurate is STL to STEP reconstruction? Our measured results

Updated 16 November 2026 · Numbers from runs on our production servers

“Convert STL to STEP” can mean two very different things. A plain conversion wraps every triangle in a flat STEP face, so the file is exact but useless in CAD. Reconstruction fits real surfaces to the mesh instead, which raises the obvious question: how far do those surfaces sit from the original? Here are our measurements, including the cases that do not work yet.

Summary

ModelTypeResultCoverageMean deviation
Stanford bunny (3D scan, 110,000 triangles)Organic303 NURBS surfaces, closed solid100%0.0088 mm
Marble bust sculpture (17,456 triangles, 515 mm, CC0 model from Poly Haven)Organic, 4.4 mm patches695 NURBS surfaces, closed solid100%0.016 mm
AI-generated bunny (Meshy GLB, 250 mm)Organic, 1 mm patchesOpen surface model99.8%0.014 mm
Same model, 2 mm patchesOrganicOpen surface model99.6%0.028 mm
Intraoral scan, lower arch (150,000 triangles, open surface)Organic, 1 mm patches2,016 NURBS surfaces, open surface99.8%0.008 mm
CAD test parts: cylinder, stepped shaft, flange, washer, cone, boxMechanicalEvery plane, cylinder and cone recovered100%≤ 0.0011 mm

Coverage is the share of the original mesh surface that lies within max(0.25 mm, 0.3% of the model size) of the result. Mean deviation is the average distance from points on the mesh to the rebuilt surfaces.

Scans and organic shapes

The Stanford bunny is the classic 3D-scan test model. Rebuilt with 1 mm patches it became a closed solid of 303 NURBS surfaces. Of 20,000 sample points, the mean distance to the result was 0.0088 mm, 95% were within 0.028 mm, and 99.0% were within 0.05 mm. The largest sampled distance was 0.25 mm, at the sharpest features, where a smooth surface rounds off a crease of the scan. The whole job took about 50 seconds and the STEP file was 5.7 MB.

A marble bust (515 mm tall, 17,456 triangles) became a closed solid of 695 NURBS surfaces with 100% coverage and a mean deviation of 0.016 mm. It took under 3 minutes, and the STEP file was 18 MB.

The intraoral scan is harder: it is an open surface, not a closed solid, and has thin, noisy edges. With 1 mm patches 99.8% of it was covered, with a mean deviation of 0.008 mm, in under a minute. We wrote up this case in detail in Intraoral scan to STEP: a real test.

AI-generated models (Meshy, Tripo and similar) export in metres, which matters: our converter reads GLB files as metres and works in millimetres. A 250 mm Meshy bunny took about 3 minutes with 1 mm patches (99.8% coverage, 0.014 mm) and about 2 minutes with 2 mm patches (99.6%, 0.028 mm). Finer patches mostly cost time.

CAD-designed parts

For mechanical parts the goal is different: not smooth patches but the exact primitive surfaces a designer would use. We keep a set of test parts whose answer is known and run them after every engine change:

Test partExpectedRecoveredCylinder radii
Box 40 × 30 × 20 mm6 planes6 planes–
Cylinder Ø20 × 30 mm2 planes, 1 cylinder2 planes, 1 cylinder10.000
Stepped shaft Ø20 / Ø123 planes, 2 cylinders3 planes, 2 cylinders6.000, 10.000
Flange Ø50 / Ø163 planes, 2 cylinders3 planes, 2 cylinders8.000, 25.000
Washer Ø30 / Ø12 × 5 mm2 planes, 2 cylinders2 planes, 2 cylinders6.000, 15.000
Cone frustum2 planes, 1 cone2 planes, 1 cone–

The radii are read straight from the STEP file: the cylinders come back with the exact radius they were designed with, to the thousandth of a millimetre. Each of these parts took between 0.2 and 7 seconds.

What does not work yet

Spheres are not recognised as spherical surfaces yet. A sphere comes back as flat faces.

Complex CAD parts with many fillets and blends currently take too long to fit. Two real parts with about 440 faces each (planes, cylinders and many toroidal fillets) fell back to faceted surfaces after the 4-minute fitting limit.

When this happens the result is labelled faceted before you pay, and faceted results are free to download. For such parts the Organic setting often gives a usable smooth result instead.

Other limits you should know about: meshes over 1 million triangles are simplified automatically to about 500,000 before an Organic rebuild (the accuracy report still compares against your original), and meshes over 5 million are refused, so simplify those first, for example with our free STL simplifier; patches much finer than the model needs can run out of memory; and a model made of many separate overlapping parts, typical of game assets, is rejected because it is not one continuous surface. Reconstruction never recovers a parametric feature tree (sketches, extrudes, fillets as features). You get surfaces and solids you can measure, edit and design around.

How we measure

After every reconstruction, 20,000 points are sampled evenly on your original mesh. For each one we measure the distance to the rebuilt surfaces, using a fine tessellation of the STEP file, and report the mean, the 95th percentile and the largest sampled value. A reverse check measures from the result back to the mesh, to catch extra or bulging geometry. If less than 85% of the mesh is covered the job fails and you are not charged; between 85% and 95% you see a warning before you download.

These numbers are sampled estimates, not guarantees: the largest sampled distance is not an upper bound. For a full picture, export the STEP as STL from your CAD system and compare it with your original in our free mesh compare tool, which shows the deviation as a color map.

Check it on your own file

Every result shows its own deviation report and 3D preview before you pay.

Convert a mesh to STEP

FAQ

How accurate is converting an STL to STEP with surface reconstruction?

On a 3D-scanned Stanford bunny the rebuilt surfaces covered 100% of the mesh with a mean deviation of 0.0088 mm. On a real intraoral scan coverage was 99.8%, and on an AI-generated model 99.8% with a mean deviation of 0.014 mm. Every result comes with a deviation report so you can check your own file.

Does mesh to STEP recover exact cylinders and planes?

For parts made of planes, cylinders and cones, yes: on our test parts every one was recovered and the cylinder radii matched to 0.001 mm. Spheres are not recognised yet, and complex CAD parts with many fillets currently fall back to faceted surfaces, which are free to download.

Why is the STEP file so large?

Every NURBS surface stores a grid of control points: 5.7 MB for the bunny, 18 MB for the bust, 12 MB for the intraoral scan. Larger patches give fewer control points and a smaller file, at the cost of fine detail.