3D scanning · Reverse engineering

How to turn a 3D scan into a CAD model

7 November 2026 · About 6 minutes

A 3D scanner gives you a mesh: an STL, OBJ or PLY made of hundreds of thousands of triangles. CAD software wants surfaces. Import the mesh into SolidWorks, Fusion 360 or Onshape and you can look at it, but you cannot fillet it, shell it or measure it reliably. Here is the workflow from scan to editable STEP, and what to expect at each step.

1. Clean the scan

Most problems in reconstruction start as problems in the scan. Before converting:

Not sure what is wrong with a file? The STL checker lists holes, flipped normals, separate parts, volume and size.

2. Choose the surface type

Your partChooseWhat you get
Organic shapes: bodies, teeth, sculptures, anatomy, AI-generated modelsOrganicSmooth NURBS patches over the whole shape
Machined or designed parts: brackets, housings, shafts, flangesMechanicalExact planes, cylinders and cones

A useful rule: if the part was designed in CAD and then scanned, try Mechanical first. If it is sculpted, grown or generated, use Organic. Mechanical on an organic shape gives jagged results; Organic on a machined part turns sharp edges into slightly rounded ones.

3. Check the units

STL has no units. Most scanners export millimetres, but some software, and almost every AI 3D generator, exports metres, so a 25 cm object arrives as 0.25 “units”. Check the size before converting: a part that should be 120 mm long but measures 0.12 is in metres. Our converter reads GLB and glTF as metres and lets you set the unit for other formats; the free resize tool also fixes it.

4. Rebuild the surfaces

For Organic reconstruction, the main setting is the patch size: smaller patches follow the scan more closely but take longer. Around 1 mm suits parts up to about 150 mm; for larger parts the converter suggests a coarser size automatically. Typical runs take 30 seconds to a few minutes.

What it achieved on real scans:

ScanCoverageMean deviation
Stanford bunny, 110,000 triangles100%0.0088 mm
Intraoral scan, lower arch (open surface)99.8%0.008 mm

Full details, including the cases that do not work yet, are in our measured accuracy results.

5. Verify before you use it

Always check a reconstructed model before machining, printing or analysing it:

What you will not get: a parametric feature tree. Reconstruction gives you surfaces and a solid you can measure, edit with direct modelling, cut, combine and design around, not the sketches and extrudes a designer would have made. For a fully parametric model, use the reconstructed STEP as a precise reference and redraw the key features.

Try it on your scan

Free 3D preview and deviation report. You only pay if you download the STEP.

Convert a scan to STEP

FAQ

Can I open a 3D scan in SolidWorks, Fusion 360 or Onshape?

You can import the STL or OBJ, but it arrives as a mesh of triangles that you cannot fillet, shell or measure reliably. To work with it as CAD you need surfaces: either rebuild them by hand over the scan, or reconstruct them automatically and import the result as STEP.

Will I get a parametric model with a feature tree?

No. You get surfaces and a solid body, usable for direct modelling, Boolean operations and as a reference, but not the original sketches and features.

Should a scan be watertight before converting?

A closed scan becomes a solid body; an open scan becomes a surface model. Small holes from missing scan data are best closed first.