Free tool · Mesh comparison

Compare two STL files

Drop a reference mesh and a second one: a color map shows where they differ, with the mean, 95th percentile and largest deviation in millimetres. Check a simplified, repaired or rebuilt model against the original, or a print scan against its CAD. It runs in your browser: nothing is uploaded.

A · REFERENCE

Drop the original here, or click

STL · OBJ · PLY · 3MF · GLB
B · COMPARED

Drop the second mesh here, or click

STL · OBJ · PLY · 3MF · GLB
🔒 Compared locally — the files never leave your computer

What you can check with it

Simplified or repaired meshes

See how far a lighter or repaired mesh moved from the original, and where. Patches and softened detail show up at once.

Mesh to CAD conversions

Export the converted STEP as STL and compare it with the input mesh to see the reconstruction accuracy over the whole surface.

Scan against design

Compare a 3D scan of a printed or machined part with its design model. Best-fit alignment lines them up first.

Two versions of a model

Find what changed between two exports or revisions of the same part.

How it works

For every point of mesh B the tool finds the nearest point on the surface of mesh A, and the other way round. The distance is signed: positive where B lies outside A, negative where it lies inside, using the direction the surface of A faces. Statistics are weighted by surface area, so densely triangulated regions do not count more.

The two directions answer different questions. B to A shows where B adds or moves material. A to B shows parts of A that B is missing, for example a hole that a reconstruction did not cover. Best-fit alignment uses the iterative closest point method and ignores the 10% of points that are furthest apart, so a missing region does not pull the alignment off.

FAQ

Are my files uploaded?

No. Both meshes are read and compared entirely in your browser; the files never leave your computer.

What do the colors mean?

Green is within your tolerance. Yellow to red means the compared mesh lies outside the reference surface, cyan to blue means it lies inside. The deviation is measured from each point of one mesh to the nearest point on the other.

Do the two files have to line up?

Files exported from the same model, such as a mesh before and after simplifying or repairing, already line up. For a scan and a CAD model in different positions, choose best-fit alignment and the tool moves the second mesh onto the reference first.

Which formats can I compare?

STL, OBJ, PLY, 3MF and GLB, in any combination. GLB files are in metres and are converted to millimetres.