STL repair
Drop a broken STL, OBJ, PLY, 3MF or GLB and get it back with holes filled, normals fixed and junk removed — with a before and after report and a 3D view of every patch. It runs in your browser: the file is never uploaded.
Drop a 3D model here, or click to choose
STL · OBJ · PLY · 3MF · GLB 🔒 Repaired locally — the file never leaves your computerWhat was fixed
What it fixes
Holes
Missing triangles leave gaps that slicers cannot close. Small holes are patched to follow the surrounding edge; large openings are only closed if you ask.
Flipped normals
Triangles facing the wrong way confuse slicers and CAD tools. They are turned to match their neighbours, and a model that is inside out is turned the right way round.
Junk triangles
Duplicate triangles, zero-area slivers and tiny floating fragments are removed. Separate parts of similar size are kept.
Ready for STEP
A watertight mesh converts into a closed CAD solid. When the report says watertight, send it to the STL to STEP converter in one click.
How it works
The tool joins vertices that sit at the same position, then checks every edge: an edge used by one triangle is the rim of a hole, and two neighbours that use an edge in the same direction disagree about which way is out. Orientation is spread from triangle to triangle across each surface, and a closed part is turned so it faces outward (a cavity inside another part keeps facing inward).
Each hole's rim is traced and filled: up to a few hundred edges with a patch that follows the rim, larger ones with a cone to the rim's centre. Filled patches are shown in orange so you can inspect them. Self-intersections and non-manifold edges are not repaired — they usually mean parts overlap, which needs a Boolean union.
FAQ
Is my file uploaded?
No. The model is read and repaired entirely in your browser; the file never leaves your computer.
What does it fix?
Holes, triangles facing the wrong way, models that are inside out, duplicate and zero-area triangles, and small floating fragments. These are the errors behind most slicer warnings and failed conversions.
What does it not fix?
Self-intersections and non-manifold edges, which usually come from parts that overlap or touch. Those need a Boolean union in a CAD or mesh tool. The report tells you if any remain.
Why was a hole left open?
By default only small holes are filled, so the open edge of a scan or a missing side is not capped by accident. Choose All holes to close everything; large holes are closed with a patch that follows the curve of the surrounding surface.
Is the repaired file ready for STEP conversion?
If the report says watertight, yes: send it straight to the STL to STEP converter with one click.