Point cloud to mesh
Turn the points from a 3D scanner, photogrammetry or LiDAR into an STL you can print, edit or turn into CAD. A scan of a whole object becomes a watertight solid; terrain and one-sided scans become a surface. It runs in your browser: the file is never uploaded.
Drop a point cloud here, or click to choose
PLY · XYZ · TXT · CSV · PTS · OBJ · LAS 🔒 Processed locally — the file never leaves your computerAuto meshes a closed object if the scan goes all the way round, otherwise a surface.
Whole object or surface?
Whole object
A figure, a part on a turntable or a person scanned all the way round. The points are wrapped in a closed skin, small gaps are filled, and you get a watertight solid that slicers and CAD tools accept.
Surface / terrain
Terrain and drone or LiDAR scans, facades, reliefs, a face — anything seen from one side. The points become an open sheet that keeps its real edges and holes, without inventing a back side.
Check it
Switch between Points and Mesh to compare. If the mesh misses thin parts, choose Fine; if it has holes where the scan is sparse, choose Coarse.
Next steps
Turn the mesh into editable CAD surfaces with STL to STEP, give a surface a thickness with Hollow or thicken, or reduce it with the STL simplifier.
How it works
Whole object: the points are placed on a fine 3D grid, and every grid cell gets its distance to the nearest point. Space that is far from the points and connected to the outside is outside; everything else is the object. The skin is placed back at the right distance from the outside, which closes gaps a few grid cells wide, then lightly smoothed and extracted as a triangle mesh. If there is no inside at all — the scan only shows one side — Auto switches to a surface.
Surface: the best-fitting plane through the points is found, the points are sorted into a grid on that plane at about the point spacing, and each cell's points are averaged into one vertex. Neighbouring cells are joined into triangles; empty cells stay open, and very long edges across steep steps are left out.
The grid follows the spacing of your points. Very large clouds are thinned to 3 million points and the grid is made coarser so the browser does not run out of memory. Coordinates far from the origin, as in LiDAR files, are moved so the model starts at 0, 0, 0.
FAQ
Is my point cloud uploaded?
No. The file is read and meshed entirely in your browser; it never leaves your computer.
Which formats can I use?
PLY (text or binary, points only or with faces), XYZ, TXT, CSV, PTS and ASC text files with one point per line, OBJ files with vertex lines, and uncompressed LAS files from LiDAR. Compressed LAZ is not supported: convert it to LAS first, for example with CloudCompare.
What is the difference between a closed object and a surface?
A closed object is a scan of something all the way round, such as a figure or a part on a turntable; it becomes a watertight solid. A surface is a scan from one side only, such as terrain, a facade, a relief or a face; it becomes an open sheet. Auto tries a closed object first and switches to a surface when the scan has no inside.
How detailed is the mesh?
The resolution follows the spacing of your points: about one and a half times the typical distance between neighbouring points, made coarser if the model is too large for the browser. Fine, Normal and Coarse change this. Small gaps in the scan are filled; detail smaller than the grid is smoothed.
Can I turn the mesh into a STEP file?
Yes. Click Turn it into STEP and the mesh opens in the Vertessia converter, which rebuilds it as editable NURBS surfaces. The preview there is free; you pay only if you download the STEP.