Free tool · Hollow & thicken

Hollow or thicken an STL

Hollow a solid model to save resin and weight, or thicken an open surface — a scan, a sheet, a single-sided AI model — into a printable solid. Set the wall in millimetres and check it in a cut-away view. It runs in your browser: the file is never uploaded.

Drop a 3D model here, or click to choose

STL · OBJ · PLY · 3MF · GLB 🔒 Processed locally — the file never leaves your computer

Batch processing is coming

Drop a whole folder, choose the settings once, and download every result in one ZIP with a report. It is not available yet. Two quick questions help us decide whether to build it.

How many files do you usually have at once?

Reading…

Hollow or thicken?

Hollow a solid

Resin figures, busts and props are often printed hollow: a 2 mm wall uses a fraction of the resin, prints faster and puts less force on the build plate. The outside surface is not touched.

Thicken a surface

Scans, sheets and many AI-generated models are just a skin with no thickness, which slicers cannot print and CAD tools cannot turn into a solid. Thicken gives them a real wall.

Check the wall

Drag the cut-away slider to slice the model open and see the cavity or the new wall. New surfaces are shown in orange.

Next steps

Estimate the material with the print cost calculator, or turn a thickened scan into a solid with STL to STEP.

How it works

Hollow builds a distance field on a fine grid inside the model, finds every point that is exactly one wall thickness from the nearest triangle, and builds the inner wall through those points. The outer surface stays exactly as it was. The model has to be watertight so inside and outside can be told apart.

Thicken copies the surface, moves the copy by the thickness along the surface normal (a little further at corners so the wall stays even), and stitches the open edges together. Where the surface curves more tightly than the thickness, the copy can fold over itself; the tool tells you if that happens.

FAQ

Is my file uploaded?

No. The model is read and processed entirely in your browser; the file never leaves your computer.

What is the difference between hollow and thicken?

Hollow is for closed solids: it keeps the outside and removes the inside, leaving a wall of the thickness you choose. Thicken is for open surfaces such as scans, sheets and single-sided AI models: it gives the surface a real thickness so it becomes a closed solid.

How accurate is the wall thickness?

For hollowing, the inner wall is placed at the exact distance from the nearest triangle, on a grid of about a fifth of the wall thickness; the outside is not changed. For thickening, every vertex is moved by the thickness, with extra distance at corners so the wall stays even.

Do I need drain holes?

For resin printing, yes. Add at least two holes near the bottom in your slicer so uncured resin can drain and the part does not crack. FDM prints do not need them.

Why does it say the model is not watertight?

Hollowing needs a closed solid so it can tell inside from outside. Repair the model with the free STL repair tool first, or use Thicken if it is meant to be an open surface.