Free tool · STL to DXF & SVG

STL to DXF & SVG

Cut a cross-section through a 3D model at any height, or slice the whole model into stacked layers for laser cutting — laid out on your sheet size, numbered in order. Save as DXF or SVG in millimetres. It runs in your browser: the file is never uploaded.

Drop a 3D model here, or click to choose

STL · OBJ · PLY · 3MF · GLB 🔒 Processed locally — the file never leaves your computer
Reading…

Cross-section or laser-cut slices?

Cross-section

One outline through the model at the height you choose: check a wall, measure a profile, or bring a shape into CAD, a CNC program or a drawing as a 2D curve.

Laser-cut slices

The model is cut every material thickness — 3 mm plywood, cardboard, acrylic — and each layer becomes a part. Glue the sheets on top of each other in number order to rebuild the shape.

Laid out for your cutter

Parts are packed onto sheets of your bed size with a gap between them, turned 90° when that helps. Red lines are cuts, blue numbers are engravings, and the total cut length is shown.

Next steps

Too big? Scale it with Resize STL first. Holes in the mesh? Fix it with STL repair. Need the full 3D part in CAD? Try STL to STEP.

How it works

Every triangle that crosses the cutting plane contributes one short line; the lines are joined end to end into closed outlines, with outside contours and holes kept apart. Outlines are then simplified to 0.02 mm — far finer than a laser kerf — so the files stay small and cutters do not stall on thousands of tiny segments.

For laser-cut slices, layer k is the cross-section halfway through its slab. Each layer stays one part with its islands and holes in place, its layer number is placed on solid material away from the edges, and the parts are packed row by row onto as few sheets as possible.

DXF files use the classic R12 format with closed polylines on a CUT layer and numbers on an ENGRAVE layer, in millimetres. SVG files are sized in millimetres, so they import at the right scale.

FAQ

Is my file uploaded?

No. The model is read and sliced entirely in your browser; the file never leaves your computer.

Which programs can open the files?

The DXF is the classic R12 format with closed polylines in millimetres, which LightBurn, Inkscape, LibreCAD, AutoCAD, Fusion and most laser and CNC software read. The SVG is sized in millimetres too, with red cut lines and blue layer numbers.

How are the layers for laser cutting made?

The model is cut every material thickness. Each layer is the cross-section in the middle of its slab, so a stack of sheets of that thickness rebuilds the shape. Each layer stays one part, with its islands and holes in place, and is numbered so you can stack them in order.

Why is a cross-section missing or open?

Cross-sections need a closed mesh. If the model has holes, some outlines cannot close and are left out. Repair it with the free STL repair tool first.

What happens to parts larger than the sheet?

A part that does not fit is turned 90 degrees if that helps. If it still does not fit, it gets its own oversized sheet and the tool warns you, so you can scale the model or use bigger material.