Quad remesh: triangle mesh to clean quads in seconds
Upload an STL, OBJ, PLY, 3MF or GLB — a 3D scan, a sculpt or a model from an AI 3D generator — and get back an evenly spaced quad mesh as OBJ, ready for Blender, Maya, ZBrush or 3ds Max. Preview it free with a deviation report; pay only if you download.
Drop a file, or click to choose
STL · OBJ · PLY · 3MF · GLB · glTF · STEP — up to 100 MBNo file handy? no sign-up
Conversion complete Free
What quad remeshing does — and what it doesn't
Scans, sculpts and AI-generated models come as dense, irregular triangles. That is fine for printing, but hard to edit, rig, subdivide or UV-unwrap. A quad remesh rebuilds the surface as a grid of four-sided faces that flows along the shape, at the density you choose, and projects it back onto your original surface.
It is automatic retopology, not hand-made animation topology: edge loops follow the shape, but are not placed around eyes or joints for a specific rig. It works best on organic shapes. CAD parts with many holes and sharp edges usually fail — convert those to STEP with the Mechanical type instead. Failed remeshes are never charged.
What to expect — real tests
Results from the live service and our own test runs (Medium setting, about 5,000 quads, "follow sharp edges" on):
| Marble bust (sculpture, 17,456 triangles) | 5,128 quads + 46 triangles, closed; 97.3% coverage, mean deviation 0.16 mm; about 10 seconds on the live service |
| Stanford bunny (3D scan, 112,402 triangles) | 4,947 quads, closed; 95% of points within 0.24 mm |
| Dental model with a flat base | 4,909 quads; the edges of the base stay crisp |
| Same bunny at about 20,000 quads | 19,967 quads; 95% of points within 0.07 mm; about 25 seconds |
| CAD housing with 23 through-holes | Failed — not charged. Use STEP with the Mechanical type for parts like this |
Fewer quads smooth away small details, so the deviation grows as you lower the quad count. Your numbers will differ; the free preview shows them for your own file before you pay.
Upload your mesh
STL, OBJ, PLY, 3MF or GLB up to 100 MB. No account is needed to remesh and preview.
Choose the quad count
Low (about 1,500) for props and blocking, Medium (about 5,000) for most models, High or Very high to keep more detail. Keep "follow sharp edges" on for creases and flat bases.
Check, then download
Compare the input and the quad mesh side by side, read the deviation report, and download the OBJ only if it is what you need.
Questions
Which programs can open the result?
The OBJ opens in Blender, Maya, 3ds Max, ZBrush, Cinema 4D, Houdini and most other 3D software, with the quads intact.
Is it 100% quads?
Almost: typically 99% quads, with a few triangles near the points where the quad flow has to change direction. The result panel shows the exact counts.
Will it keep my details?
Detail is limited by the quad count. Choose High or Very high to keep more of it; the deviation report tells you how far the quad mesh is from your original.
Does it work on CAD parts?
Usually not: parts with many holes and sharp mechanical edges often fail, and you are not charged. For CAD parts, convert to STEP with the Mechanical type.
What does it cost?
Remeshing and the 3D preview are free. Downloading the OBJ costs one credit (from $1 per file in a pack), or one download from a monthly plan; new accounts get 1 free download.
Free to convert and preview. Pay only for the STEP you keep.
Mesh conversions and STEP → mesh are free, without an account. Reconstruction (mesh → editable STEP) always runs at full quality and the 3D preview is free — one download costs one credit. Failed conversions and re-downloads are never charged.
- All mesh conversions, free
- STEP → mesh, free
- Reconstruction + 3D preview (free account)
- 1 free STEP download when you sign up
- Pay when you download — no subscription
- Or 10 downloads for $12, 30 for $30
- Credits never expire
- No subscription
- Small “Converted by Vertessia” note in the STEP header — geometry untouched
- 30 STEP downloads / month
- Clean STEP header
- Priority queue
- 200 STEP downloads / month
- Clean STEP header
- Priority queue
For comparison: a scan-to-CAD service typically charges $70–550 per part and takes days, reverse-engineering software starts around $600 a year, and free online converters return one flat face per triangle.
Higher volume? Team — 1,000 downloads / month for $249 — subscribe. API usage draws on the same credits. Custom volume or other needs: info@vertessia.com
Try it on your own part
No install, no CAD licence needed